EEC-35++ eddy current tester for air conditioning pipe flaw

Model

 EEC-35++  EDDY CURRENT TESTER

Type

  EDDY CURRENT TESTER / PIPE FLAW TESTER

Technical Parameters

--Dual eddy current frequencies

--Frequency range from 64Hz to 4MHz

--2 independently-selectable channel

--Signal mixing capabilities

--Adjustable gain from 0dB to 90dB in   0.5dB steps.

--360 degrees phase shift can be varied in steps of 1 degree,the impedance plane can  be rotated during modification for ease of operation

--Colored real-time display of x-y impedance plane  and/or strip chart signals.

--A-scan and C-scan displays

--Display 3-simultaous x-y signals 2 built-in strip chart signals

--Delay erase display mode

--Independent vertical to horizontal display  scaling ratio adjustable from 0.1 to 10

--Viewing area (Enlarge location area  signal)

--All instrument settings are shown on the display.                     

--Digital filters

--Audio, visual and logic output alarms                                   

--Fast electronic balancing   

--Special alarm areas adjustable from 1 to 8                            

--Signal phase and amplitude auto measurement functions 

--Adjustable sampling rate.

--Alarm area is provided for each  display window of impedance plane   

--Four connectors are provided for differential, absolute and reflection  type probes

--Alarm area size and positioning are independently adjustable. either inside or outside the gated area     

--Phase/amplitude alarm area: The amplitude of alarm area is a function versus its phase, so defects in different layer which have  the same amplitude  level can be distinguished  by their phases.

--Alarm can be set to trigger. 

Application

--This intelligent tester is designed for real-time effectively defect detection in metal materials, thickness measurement and sorting materials by metallurgical differences, and weld inspection.

-- It can be used to test conductive materials and measure the coating thickness. EDDYSUN own the advanced mixing algorithms, providing the cleanest, most effective signal mixes.

-- The audio, visual and logic output alarms can determined flaw conditions. Real-time C-scan display helps you to differentiate between multiple layers and determine flaw orientation.

-- This equipment is well used in air conditioning pipe, power & petrochemical field etc.